A French Morbier Clock

         The French Morbier clock is known as a privincial clock, to distinguish it from clocks made in major urban centres, primarily Paris. The clock was named after the village of Morbier, located about 30 miles North to North-West of Geneva on a trade route, la route nationale 5, between Paris and Geneva. Morbier was a rural, agricultural (dairy) community in the Jura Mountains of the Franche-Comté region, near the French border with Switzerland, famous for their Morbier cheese. Starting in the second half of the 18th Century, farmers began to manufacture clock parts during the cold winter months. These clock parts were purchased by finishers, who would assemble the parts to create a clock. The clocks were then ostensibly sold to travellers passing through town. Morbier clocks are also known as Comtoise clocks because of the Franche-Comté region where they were produced. Production stopped around 1914. Tourism is a significant part of the local economy nowadays, supplementing income from agriculture as the production of clocks once did.

         Below are photos of a Morbier clock as it was disassembled, revealing the high quality of its relatively massive parts, mostly made and finished by hand.

Fig. 1

         The photo in Figure 2 shows the clock after the pendulum leader, the hour wheel and the minute wheel have been removed.

Fig. 2

         The clock is serviced in two stages. Here the time train is shown during disassembly. This particular clock is a later example of a Morbier, from about 1900, showing a recoil anchor escapement. Earlier Morbier clocks have the crown escape wheel, essentially the Verge and Foliot escapement adapted for use with a pendulum. All escapements with crown wheels wear more quickly because of considerably higher levels of friction in the actions of the pallets. While the earlier Morbiers are certainly more desirable among collectors, later examples are preferable because of better technology and greater durability.

Fig. 3

         The back plate is also removed for cleaning and repair.

Fig. 4




Fig. 5

         After servicing the time train, the strike train is disassembled for servicing similarly. Morbier clocks are the only clocks I have seen with the vertical rack. Another unusual feature that Morbiers have is that they strike twice on the hour: for example, at 6:00, the clock strikes six times, and at 6:02, the clock strikes six times again. My understanding is that the first strike was a call to prayer and the second strike was to indicate when to begin prayer. The clock also strikes once on the half hour. The religious tradition seen here dates back to the 12th Century, when most clocks were built for churches. People listened to the church bells to know what time it was, when to pray, and when to eat. The plates holding the gears together in Morbier clocks are somewhat similar in design and construction to the medieval church tower clocks, made of strips of forged iron, as if the Morbier clocks were small versions of the great tower clocks.

Fig. 6




Fig. 7

         The last two photos show side views of the time and strike gear trains. The use of decorative weights (force of gravity) in the strike levers instead of springs is an elegant design which works very well.

Fig. 8




Fig. 9


Links:
Map of Franche-Comté
Morbier village
Morbier Clock




Go to the Vienna Regulator Clock

Clock Repair Main Page
Escapements in Motion
Links Page
Tributes Page
Home Page